Week: 1

Today we looked at the AR 2.0s and got one of them flying. We are going to salvage a camera off of one that doesn't fly and put it on one that flys.

Comments

Post a Comment

Popular posts from this blog

Week 14 - Finished

Image
We are done with our project. Our goal was to get as many drones flying as we could. We ended up getting 2 AR2.0s flying and the quad. I think we could have got more don't if we didn't spend so much time on the hexacopter but at least we got it all put together. We also got the taranis transmitter set up so we could use it on most of the drones we build here. These are pictures of the completed taranis and quad.
Read more

Week 13: ALMOST THERE

Today we dialed in the quad with gps with a quick trip to home depot to get some super glue to tighten her down. after we got the quad flying with it and tested it with some wind. Even with a slight wind the quad kept its place in the air and performed beautifully. WITHOUT CRASHING... For once.
Read more

Week 14 - Giving up on the Hexa

Image
The hexa copter has been an on and off project for a few years now. A few different people have tried to get it working but it seems to be cursed. We tried tackling the problem but ended up with the same outcome. We actually got it flying pretty well but it would do a flip out of nowhere every few minutes. We figured the problem was the old spektrum setup we were using and figured switching to the brand new taranis would fix it. After switching to taranis the hexa wouldn't even budge, at this point we were out of time and came to the conclusion it was cursed. These are pictures of the completed quad.
Read more